 |
 |
 |
 |
|
Aquarobic Maxi-Plant™ Factory Built Components
- The Maxi-Plant's™ equipment package comes completely assembled and wired. Field assembly consists of installing the air diffusers system, fiberglass manway(s) and inter-connecting electrical wires to the control panel.
Standard electrical requirements for the Maxi-Plant TM series:
From 5,000 to 15,000 gallons per day:
1 phase, 60 Hz., 230 volt, 2 hot wires plus a neutral and a ground wire,
From 15,000 to 85,000 gallons per day:
3 phase, 230/460 volt, 60 Hz., 3 hot wires plus a neutral and a ground.
- The timer, alarm and control system on all units are always 115 volts single phase powered.
Design Parameters:
100 gallons per person per day or 400 gallons per residence (Using standard flush toilets).
- 2100 cubic feet of air per pound of BOD5 and an estimated 0.17 lb. of BOD5 per person per day.
- Three hours of uninterrupted settling prior to discharge in situations involving heavy seasonal use.
- Water saving devices are necessary for the formula assumption.
|
|
 |
 |
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
|
|
|
|
The Mini-Plant series (Sequencing Batch Reactor-SBR) treats wastewater flows from 500 to 5,000 gallons per day. |
|
|
|
|
|
|
|
 |
 |
|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
The Maxi-Plant series (Sequencing Batch Reactor-SBR) treats wastewater flows from 5000 to 100,000 gal per day. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
